High Durability Steel Crawler Track For Water Borehole Drilling Rig Machines

Strong Steel Crawler Track Undercarriage For Large Water Borehole Drilling Rig Machines
 
 
Product Description
 

 
Product Tech Details

Product Advantages
 
1: good stability. Thanks to the crawler structure, the crawler chassis can have very good stability because of its large contact area with the ground when running in application, and can ensure that its running effect is very stable.
2: fast operation. Although compared with the chassis of other structures, the crawler chassis is running at a lower speed, but from its specific performance, it can still reach a faster running speed, and can fully meet everyone's requirements in terms of running speed.
3: lasting operation. In terms of the specific performance of the crawler chassis in the application, it can achieve lasting operation by virtue of its own structure and performance advantages.
Different steel track dimensions are always possible at no extra cost. Contact us or complete the intake form with the required dimensions for your steel tracks.The track adjuster is used to adjust the tightness of the track. It is composed of bracket, crank arm, shaft sleeve, worm gear, worm, screw, friction plate and bushing. The degree of track tension has a great impact on tank driving and track life. The track is too tight or too loose. Different use environments require different tightness of the track. If driving on a hard road, the track should be tensioned; When driving in desert areas, the track should be tensioned loosely. In addition, as the wear of the track pin and the pin ear hole increases, the track will also become loose. In order to maintain the proper tension of the track, it is necessary to use the track adjuster to adjust the tightness of the track. This is to change the track tension by changing the distance between the inducer and the driving wheel with the help of the track adjuster. The track adjuster makes the inducer swing backward to a certain position, and the inducer is away from the driving wheel, so the track is tensioned; The track adjuster makes the inducer swing forward to a certain position, and the track becomes loose.
 
Product Application
 
Crawler chassis assembly is mainly used for special occasions, such as military parade, tanks, armored vehicles, etc. What are its advantages: rubber track has the advantages of protecting the ground, rubber track walking system, low noise, low vibration, comfortable riding, etc. It is suitable for situations with high speed and many transfers, and achieves the all-road performance. Reliable electrical instruments and complete machine status monitoring system provide reliable assurance for the driver to operate correctly
Due to the different use methods and soil conditions, the working life of rubber track also varies greatly. Generally speaking, its average life is about 2000 hours. However, when working in rock or easily worn environment, the service life will be halved; On the contrary, the working life will be doubled in a better environment. When the user checks the track and chassis, don't forget to drive again to check the oil level and cleanliness. This part is easy to be ignored, and there is usually less oil left.
 

The choice of working environment is as follows:

(1)The temperature of the rubber crawler is generally between -25° + 55°.

(2)The salt of chemicals, oil and seawater will accelerate the aging of the track. In such an environment, the track should be cleaned frequently.

(3)The road surface with sharp protrusions (such as steel bars, stones, etc.) can damage the rubber track.

(4)The edge stone, rut or uneven road surface of the road will cause cracks on the ground side pattern of the track edge. This crack can continue to be used without injuring the steel cord.

(5)Gravel and gravel pavement will cause early wear of the rubber surface in contact with the load-bearing wheel to form a small crack. Severe moisture will invade, causing the core iron to fall off and the steel wire to break.