Pneumatic ST1000 type water well drilling rig with fast drilling speed
The ST 1000 pneumatic deep well drilling rig is an efficient and reliable pneumatic drilling equipment, mainly used in deep well drilling, hydrogeological exploration, mining and other fields. The following is the detailed information of the product:
1. Product Overview
model: ST 1000
Type: Pneumatic deep well drilling rig
Power source: Compressed air drive
Applicable fields: deep well drilling, hydrogeological exploration, mining, geothermal drilling, etc.
2. Main features
Efficient power: Equipped with a pneumatic motor, it has strong power and is suitable for high-intensity operations.
Strong adaptability: can work under complex geological conditions, such as rocks, hard soil layers, etc.
Easy to operate: The structural design is reasonable and easy to operate and maintain.
High safety: No electric sparks, suitable for flammable and explosive environments.
Modular design: convenient for transportation and on-site assembly.
3. Application Fields
Hydrogeological exploration: used for groundwater exploration and hydrological monitoring well drilling.
Mining: used for mining exploration and ventilation shaft drilling.
Geothermal drilling: used for geothermal energy development.
Engineering construction: used for building foundation pile holes, tunnel drilling, etc.
ST 1000 Pneumatic Borewell Machine Main Technical Data:
|
Model
|
Shitan ST 1000 |
Max drilling depth |
M |
1000 |
Drilling diameter |
mm |
105-500 |
Air pressure |
Mpa |
1.2-3.5 |
Rod length |
m |
6 |
Rod diameter |
mm |
102-114 |
Main shaft pressure |
T |
6 |
Lifting force |
T |
45 |
| Power head stroke |
M |
47 |
Max rotary torque |
Nm |
22000 |
Max rotary speed |
r/min |
80-160 |
Secondary winch liftng force |
T |
3 |
Jacks stroke |
m |
1.5 |
Moving speed |
km/h |
2.5 |
Uphill angle |
Slope |
21° |
Weight of the rig |
T |
18 |
| The engine |
242KW / 6 cylinder |
Overall dimensions |
6200*2200*2500mm |
Working condition |
Loose layer and bedrock |
Drilling method |
Hydraulic rotary, down-the-hole impactor |
ST 1000 Pneumatic Borewell Machine Main Advantages"
1. It improves drilling efficiency and reduces labor intensity With hydraulic automatic feeding mechanism.
2. It can be achievedwithout stopping to change rods, easy to operate, safe and reliable with ball clip holding mechanism orhydraulic chuck.
3. It hashole bottom pressure gauge to be easy to master the situation in the hole.
4. It also has advantage of Compact structure,concentrated handle, small footprint, light weight, strong decomposition, easy tomove. It can be operated in plains and mountainareas.
Pneumatic Borewell Machine maintenance
Our machines can be applied to various countries in the world, suitable for various scenarios, various geological scenarios including deserts, swamps, grasslands, mountains, orchards, etc.
Correct maintenance and repair is very important to maintain the technical performance, service life and reliability of the drilling rig. Daily maintenance and repair are carried out before and after the shift every day. The main contents are as follows:
(1) check whether all fasteners are loose.
(2) check whether the spindle rotates flexibly.
(3) check whether all control switches are normal and flexible.
(4) check whether the oiler is normal, whether the oil quantity is qualified and whether the oil quality is qualified.
(5) after use, it shall be cleaned in time to remove dirt and clean up.
(6) remove rust spots on rusty parts and apply rust inhibitor.
(7) there is a filter screen at the pipe joint in the gas path, which can not be removed at will, but also cleaned regularly.
(8) the shell of the drilling rig is made of aluminum alloy. It is strictly prohibited to fall, smash and press.
(9) disassemble and clean regularly, clean all parts in the motor housing and add lubricating oil. Parts with severe wear shall be replaced. Generally, the two handles do not need to be removed, but the air pipe connector can be removed to clean the filter screen.
