Trailer Mounted XY-1A G-200 Portable Water Well Drilling Rig

200M Hydraulic Trailer Mounted Portable Water Well Drilling Rig For Sale

Introduction to drilling rig

The rig is suitable for survey and prospecting, geophysical exploration, roads and buildings and other exploration and play blasthole drilling bits projects.Drilling bits can be chosen according to different strata .

Parameters of water well drilling machine

Features of water well drilling machine

1. hydraulic automatic feed mechanism, improve drilling efficiency, reduce manual labor workers.

2. Ball holding mechanism instead of using the chuck, can implement non-stop down the lever, easy to operate, safe and reliable.

3. With bottom hole pressure gauge indicates the pressure, easy to grasp hole situation.

4. The handle centralized, easy to operate.

5. Light weight, decomposition and strong, easy to move, adapted to the plains or mountain areas

200M Hydraulic Trailer Mounted Portable Water Well Drilling Rig For Sale

The reason why the drill can't start when starting

1, Circuit reason: it is mainly manifested in that there is no response when turning on the ignition switch or the starting motor speed is too low, and it can feel weak. If these two phenomena occur and the car fails to start, it can be roughly determined that the starting circuit has failed.

1. Check the battery pile head

First, check the battery pile head, clean the battery pile head, and then tighten the screw of the pile head. Several times before, the battery pile head failed to catch fire because the battery pile head was loose, resulting in poor contact and insufficient voltage. If possible, the owner can measure the battery voltage with the multi-meter voltage gear. If the battery is not faulty, the next step is to check the line. Follow the line of the battery and observe whether there is a broken line or a loose connector.

2. Check the relay box fuse box?

Next, start to check the starting relay and fuse box, open the relay box to check whether the connector is loose, and then open the fuse box to check whether the fuse of the starting circuit is burnt out. Of course, the failure of the starting motor or generator can also lead to non ignition. Among them, the failure of the generator will lead to the failure of the generator to generate electricity normally, and the battery power cannot be replenished, resulting in the low speed or non rotation of the starting motor.