300 Meters Depth Pneumatic Borewell Machine Customized Rocky Hard Stone Strong

300 Meters Depth Customized Rocky Hard Stone Strong Pneumatic Borewell Machine

ST 300 Pneumatic Borewell Machine Descrption:

ST 300 drilling rig has 300 drilling depth ,300mm hole diameter ,it is for water well drilling , mainly applicable to industrial and civil drilling, geothermal drilling, has the advantages of compact structure, fast advancing, mobile and flexible wide application region etc.

ST 300 Pneumatic Borewell Machine Techs:

ST 300 Pneumatic Borewell Machine Features:

1. The rig adopts an automatic telescopic rig, supported by two high-strength oil cylinders, and a set of hydraulic valves control the pitch of the rig, which saves time and effort in operation, is safe and reliable, and maximizes the benefits for users.

2. The chassis adopts rubber crawler, which is lighter in weight, which can reduce the noise of the vehicle's running mechanism, reduce the vibration of the vehicle body, and greatly reduce the fuel consumption. It can walk on urban roads without hurting the road surface.

3. The chassis comes with hydraulic high outriggers, which can be used for drilling rig leveling, loading and unloading trucks, and can be used as an auxiliary support when working.

4. The 24V electric start diesel engine is used to reduce the labor intensity of the operator, especially in the cold season, when the diesel engine is difficult to start, it shows great advantages.

5. This machine is equipped with BW-160 mud pump, which has large flow and pressure, and is convenient for maintenance. Parts and accessories are easy to purchase all over the country.

6. A hydraulic pipe screwing machine (75-168mm) can be optionally installed to improve work efficiency and reduce labor costs.

The main causes of drill pipe fracture are:

1, The bending moment of drill pipe is too large in the process of reaming and pipe pulling back;

2, The reasons for the excessive bending moment are as follows: first, the actual curve of the guide hole deviates greatly from the theoretical curve; Second, the hole after reaming is irregular, which makes the pipe form an included angle with the reamer and the drill pipe axis.

Operating Instructions:

During the working process of water well drilling rig, the pump is used for reverse circulation operation. Under the action of atmospheric pressure, the circulating fluid flows from the sedimentation tank to the bottom of the well through the return ditch along the annular gap of the well. At this time, the rotary table drives the drill pipe to drive the drill bit to rotate for drilling.